SPRAYMAN Window & Door Low Expansion Spray Foam - Gun Foam, 24 oz

Seal and insulate with precision using SPRAYMAN Window & Door Foam, the definitive solution as a large 'gap filler' for window insulation foam and door frame insulation. This single-component, low expansion spray foam, crafted from polyurethane expanding foam, is specially formulated for easy and effective application via a gun applicator, ensuring higher yields and superior control, with coverage up to 12 gallons. Perfect for a wide range of sealing and insulating applications such as door gap filler and window and door spray foam, it is ideal for window and door installations requiring precise foam placement without excessive expansion. It is environmentally safe, contains no harmful propellants, and is UL 723 certified to meet rigorous standards for safety and performance.

• Specially Formulated: This polyurethane foam is tailored for sealing gaps around window frames and door edges, expanding sufficiently to fill spaces without over-extension, which prevents undue stress on hinges and frames. Its controlled expansion and flexibility ensure it adapts to temperature fluctuations, maintaining an effective seal and protecting the window and door mechanisms from damage.
• Versatile Use: Ideal for a broad range of applications, effectively insulates door frames and windows as a door frame foam and spray foam for windows, fills large gaps, and seals penetrations around electrical outlets, water pipes, and walls.
• Enhanced Adhesion: Strong adhesion capabilities, particularly as a door sealer foam and foam filler for gaps, excluding surfaces such as polyethylene, silicone, or those contaminated with oils.
• Superior Efficiency: Acts as an expanding foam waterproof barrier that offers exceptional thermal and acoustical insulation values.
• Mold and Water Resistant: Foam exterior window trim that is mold-proof, water-proof, and can be painted over to match any decor.
• Eco-Friendly: Free from ozone-depleating substances, supporting a healthier environment.

• Safety Precautions: Contains Diphenylmethane-4,4'-Diisocyanate, known for its potential health hazards if inhaled or if it comes into contact with the skin. Wear protective clothing and gloves during application.
• Surface Preparation: Surfaces must be clean, dry, and free of dust, grease, or rust to ensure optimal adhesion. Lightly moisten surface to improve foam expansion and adhesion.
• Optimal Use Conditions: Apply at temperatures from +28°F to +86°F. The can should be at room temperature (+68°F) for best results.
• Installation: Shake can vigorously before use, attach to the applicator gun, invert and dispense slowly. Start from the bottom of the gap and work upwards to avoid overfilling as the foam will expand.
• Curing and Finishing: Foam is tack-free within approximately 7±3 minutes and cures fully in 24 hours. Once cured, it can be trimmed, shaped, and sanded for precise adjustments. Requires immediate painting or covering to prevent UV damage.

• Volume: 24oz.
• Cure Mechanism: Moisture cure with a full cure time of 24 hours.
• Temperature Resilience: Effective performance from -40°F to +176°F once cured.
• Fire Rating:B3, as per DIN 4102-1.
• Storage: Store in a cool, dry place out of direct sunlight. Recommended storage temperature does not exceed 122°F.